碳酸钴中钴碳氮的测定与结构表征研究

碳酸钴由于受生产工艺的制约,生产的产品组分复杂,且市售碳酸钴产品的命名也存在多样性。采用X射线荧光光谱仪、电感耦合等离子体发射光谱仪、元素分析仪、X射线多功能粉末衍射仪和红外吸收光谱仪对某碳酸钴产品的成分进行测定和结构表征。结果表明:该碳酸钴产品钴、碳、氮的含量分别为46.53%、8.31%和1.48%,相对标准偏差(RSD)≤3.3%(n=6)。研究新发现了N在碳酸钴产品中以NH+4的形式存在,确认该产品为水合碱式碳酸钴铵[(NH4)1.89Co7.88(CO3)6(OH)6(H2O)4.27]和碳酸钴(CoCO3)的混合物。     

Short Radiative Lifetime and Non-Triplet Sensitization in Near-Infrared-Luminescent Yb(III) Complex with Tripodal Schiff Base

We prepared Ln(III) (Ln=Eu, Gd, and Yb) complexes with a tripodal Schiff base, tris[2-(5-methylsalicylideneimino)ethyl]amine (H₃L) and studied their photophysical properties. Upon ligand excitation, YbL showed Yb(III)-centered luminescence in the near-infrared region. While the overall quantum yield (0.60(1)%) of YbL in acetonitrile was moderate among the reported values for Yb(III) complexes, its radiative lifetime (0.33(2) ms) was significantly shorter than those reported previously. We propose that the ligand-to-metal charge-transfer (LMCT) state mediated the sensitization in YbL. The emission and excitation spectra of EuL indicated the participation of the LMCT state in the sensitization. The radiative lifetime (0.84(7) ms) for EuL in the solid state was rather short compared to those of reported Eu(III) complexes. Our results show that the Yb(III) complex with the Schiff base ligand has two features: the short radiative lifetime and the non-triplet sensitization path.     

Speciation of Copper(II)-Betaine Complexes as Starting Point for Electrochemical Copper Deposition from Ionic Liquids

The application of ionic liquids for the dissolution of metal oxides is a promising field for the development of more energy- and resource-efficient metallurgical processes. Using such solutions for the production of valuable chemicals or electrochemical metal deposition requires a detailed understanding of the chemical system and the factors influencing it. In the present work, several compounds are reported that crystallize after the dissolution of copper(II) oxide in the ionic liquid [Hbet][NTf₂]. Dependent on the initial amount of chloride, the reaction temperature and the purity of the reagent, copper crystallizes in complexes with varying coordination geometries and ligands. Subsequently, the influence of these different complex species on electrochemical properties is shown. For the first time, copper is deposited from the ionic liquid [Hbet][NTf₂], giving promising opportunities for more resource-efficient copper plating. The copper coatings were analyzed by SEM and EDX measurements. Furthermore, a mechanism for the decomposition of [Hbet][NTf₂] in the presence of chloride is suggested and supported by experimental evidence.     

Synthesis,chemical properties,and CO2 electroreduction of π-conjugated polymers bearing imidazolium and imidazolinium rings in the polymer backbone

π-Conjugated polymers (CPs) bearing imidazolium and imidazolinium rings in the polymer backbone were prepared from a previously reported monomer, 1,3-bis(2,3-dimethyl-4-bromophenyl)imidazolium chloride, and a newly synthesized monomer, 1,3-bis(2,3-dimethyl-4-bromophenyl)imidazolinium chloride, via Sonogashira and Suzuki–Miyaura coupling reactions. The corresponding model compounds were also synthesized via the same reactions and monomers. The absorption maxima and onset position of the UV–vis spectra of the polymers were observed at longer wavelengths than those of the model compounds, thus revealing the presence of extended π-conjugation along the polymer backbone chain. Both polymers and model compounds were photoluminescent in solution and exhibited solvatochromism. The cast films of the polymers on the Pt and Ag electrodes were demonstrated to be effective catalysts for CO₂ electroreduction.     

Low percolation conductive graphite flakes-filled poly(urethane-imide) composites with high thermal stability via imidization self-foaming structure

In the study, the conductive graphite flakes filled poly(urethane-imide) composites (PUI/GFs) with high performance were constructed by the thermal imidization self-foaming reaction. It was found that the foaming action could promote the redistribution of GFs during curing process and the formation of stable linear conductive pathways. The percolation threshold of PUI/GFs composites was lowered from 1.26 wt% (2000 mesh GFs) or 0.86 wt% (1000 mesh GFs) to 0.79 wt% (500 mesh GFs), which were relatively low percolation thresholds for polymer/GFs composites so far. When the content of 500 mesh GFs was 4.0 wt%, the electrical conductivity of the composite was as high as 3.96 × 10^?1 S/m. Also, a poly(urethane-imide) (PUI) matrix with excellent thermal stability (T_d10%: 334.97 °C) and mechanical properties (elongation at break: 324.52%, tensile strength: 15.88 MPa) was obtained by introducing the rigid aromatic heterocycle into the polyurethane (PU) hard segments. Moreover, the zero temperature coefficient of resistivity for the composites was observed at the temperature range from 30 °C to 200 °C. Consequently, PUI/GFs composites may provide the novel strategy for considerable conductive materials with high thermal stability in electrical conductivity.     

Palladium-based bimetallic catalysts for highly selective semihydrogenation of alkynes using ex situ generated hydrogen

Semihydrogenation of alkynes to alkenes is an important and fundamental reaction in many industrial and synthetic applications and often suffers low selectivity because of the overhydrogenation. Here, highly selective semihydrogenation of alkynes is achieved by using H₂ ex situ generated from formic acid dehydrogenation with palladium (Pd)-based bimetallic catalysts through a two-chamber reactor in this work, realizing efficient utilization of H₂ and selective production of alkenes under mild reaction conditions. The Pd-based bimetallic catalysts show excellent catalytic performances for semihydrogenation of alkynes (PdZn bimetallic catalyst) and dehydrogenation of formic acid (PdAg bimetallic catalyst) in the two-chamber reactor.     

Mesoionic Carbene Cobalt Complexes as Multipurpose Catalyst Precursors for Hydrosilylation and Dihydropyrimidinone Synthesis

Metalation of CH₂OH-substituted triazolium salts with CoCl₂ under basic conditions affords C,O-bidentate chelating carbene Co(III) complexes ( 3a , 3b ), while analogous phenyl-substituted triazolium salts produce monodentate carbene Co(II) complexes ( 3c , 3d ). The distinct substituent-induced properties of the metal centers were demonstrated by electrochemical measurements and catalytic activities in two specific processes. The complexes showed appreciable activity in the reduction of C=O bonds through hydrosilylation, with methoxybenzene-functionalized triazolylidene Co(III) complex 3a achieving a high selectivity towards aldehydes vs. ketones with turnover frequencies (TOFs) up to 200 h⁻¹. The C,O-chelate systems were also active catalysts in the Biginelli process, a one-step three-component reaction for efficient dihydropyrimidinone synthesis. Optimization of reaction conditions provides high activity with complex 3a , reaching TOFs of 800 h⁻¹, the highest activity known for cobalt NHC complexes to date.     

A Bifunctional B,N-Based Asymmetric Catalytic Nitrostyrene-Michael Addition Acting through a 10-Membered Ring Cyclic Transition State

The B,N-bifunctional catalyst homoboroproline has been applied to a catalytic asymmetric nitroalkene-Michael addition to β-nitrostyrene analogues, showing broad substrate tolerance, high conversions and moderate to good asymmetric induction. The ability of homoboroproline to act as an efficient catalyst based on enamine-formation of the secondary amine, coupled with intramolecular Lewis-acid chelation of the nitro function, in a non-FLP manner, to effect efficient and enantioselective catalysis via a proposed large 10-membered ring transition state is remarkable and reinforced by theoretical calculations.     

Zr-MOF空心纳米球固载离子液体对CO2环加成反应的催化性能

通过后合成修饰方法(PSM)构筑了空心纳米球(Void@UiO-66-Ⅰ)和实心块(UiO-66-Ⅰ) 2种形貌的季铵盐功能化UiO-66-NH₂(Zr), 得到兼具酸碱活性位点和氢键给体的新型功能化金属-有机框架材料. 通过一系列表征证明2种催化剂的成功合成, 并将它们用于催化转化CO₂和氧化苯乙烯的环加成反应. 由于Void@UiO-66-Ⅰ催化剂的季铵盐部分含有大量的羟基和卤素阴离子, 可以通过氢键和亲核攻击与环氧化合物连接, 诱导环氧化合物开环, 促使反应顺利进行, 且催化剂的中空结构有利于物质进出催化剂, 起到加快反应速率的作用, 使得该催化剂在CO₂与氧化苯乙烯环加成反应中表现出比实心块UiO-66-Ⅰ催化剂更好的催化性能. Void@UiO-66-Ⅰ催化剂在120 ℃, CO₂压力为1.2 MPa, 反应时间为6 h, 无溶剂和助催化剂的反应条件下, 碳酸苯乙烯酯的收率和选择性分别为85.5%和95%.     

Poly(carboxyethyl acrylate-co-ethylene glycol dimethacrylate) precursor monolith with bonded octadecyl ligands for use in reversed-phase capillary electrochromatography

A carboxy precursor monolithic column, namely poly(carboxy ethyl acrylate-co-ethylene glycol dimethacrylate) was first produced in a 100 μm i.d. fused-silica capillary and subsequently surface bonded with n-octadecyl (C₁₈) ligands by a post-polymerization functionalization process with octadecylamine in the presence of N,N´-dicyclohexylcarbodiimide. The bonding of octadecyl ligands was achieved via an amide linkage between the carboxy functions of the precursor monolith and the amino group of the octadecylamine compound. The resulting C₁₈ monolith exhibited a very low electroosmotic flow (EOF), a fact that required the incorporation of small amounts of 2-acrylamido-2-methylpropane sulfonic acid (AMPS) in the polymerization solution to produce a precursor monolith with fixed negative charges of sulfonate groups. This may indicate that the conjugation of the carboxy functions with octadecylamine occurred to a large extent so that the amount of residual carboxy functions was sparsely dispersed and not enough to produce a desirable EOF. The EOF velocity of the C₁₈ column having fixed negative charges provided by the incorporated AMPS increased with increasing ACN content of the mobile phase signaling an increased binding of mobile phase ions to the polar amide linkages near the monolithic surface, and a decreased viscosity of the mobile phase, both of which would result in increased EOF velocity. The C₁₈ monolithic column constituted a novel nonpolar sorbent for reversed-phase capillary electrochromatography for nonpolar solutes, e.g., alkylbenzenes, alkylphenyl ketones, and polyaromatic hydrocarbons, and slightly polar compounds including phenol and chlorophenols. The C₁₈ monolithic column exhibited relatively high selectivity toward chlorophenols differing by one chloro substituent.